Register Memory


What is ROM What is Memory Unit

What is Register Memory

Register memory is the smallest and fastest memory in a computer. It is located in the CPU in the form of registers. A register temporarily holds frequently used data, instructions and memory address that can be quickly accessed by the CPU.

Register are used to quickly accept, store, and transfer data and instructions that are being used immediately by the CPU, there are various types of Registers those are used for various purpose. Among of the some Mostly used Registers named as AC or Accumulator, Data Register or DR, the AR or Address Register, program counter(PC), Memory Data Register (MDR) ,Index register,Memory Buffer Register.

These Registers are used for performing the various Operations. While we are working on the System then these Registers are used by the CPU for Performing the Operations. When We Gives Some Input to the System then the Input will be Stored into the Registers and When the System will gives us the Results after Processing then the Result will also be from the Registers. So that they are used by the CPU for Processing the Data which is given by the User. Registers Perform;

Fetch: The Fetch Operation is used for taking the instructions those are given by the user and the Instructions those are stored into the Main Memory will be fetch by using Registers.

Decode: The Decode Operation is used for interpreting the Instructions means the Instructions are decoded means the CPU will find out which Operation is to be performed on the Instructions.

Execute: The Execute Operation is performed by the CPU. And Results those are produced by the CPU are then Stored into the Memory and after that they are displayed on the user Screen.

Types of Registers

Data Register: (DR)DR holds the operand read from the memory.
Address Register (AR)Holds address from memory.
Processor registerThe accumulator (AC) register is a general purpose processing register.
Instruction Register (IR)IR holds the instruction read from memory or in other words holds instruction code.
Temporary Register (TR)TR is used for holding temporary data during processing.
Input Register (INPR)Holds input character
Output Register (OUTR)Holds output character.

MAR stand for Memory Address Register

This register holds the memory addresses of data and instructions. This register is used to access data and instructions from memory during the execution phase of an instruction. Suppose CPU wants to store some data in the memory or to read the data from the memory. It places the address of the-required memory location in the MAR.

Program Counter

The program counter (PC), commonly called the instruction pointer (IP) in Intel x86 microprocessors, and sometimes called the instruction address register, or just part of the instruction sequencer in some computers, is a processor register.

It is a 16 bit special function register in the 8085 microprocessor. It keeps track of the the next memory address of the instruction that is to be executed once the execution of the current instruction is completed. In other words, it holds the address of the memory location of the next instruction when the current instruction is executed by the microprocessor.

Accumulator Register

This Register is used for storing the Results those are produced by the System. When the CPU will generate Some Results after the Processing then all the Results will be Stored into the AC Register.

Memory Data Register (MDR)

MDR is the register of a computer's control unit that contains the data to be stored in the computer storage (e.g. RAM), or thedata after a fetch from the computer storage. It acts like a buffer and holds anything that is copied from the memory ready for the processor to use it. MDR hold the information before it goes to the decoder.

MDR which contains the data to be written into or readout of the addressed location. For example, to retrieve the contents of cell 123, we would load the value 123 (in binary, of course) into the MAR and perform a fetch operation. When the operation is done, a copy of the contents of cell 123 would be in the MDR. To store the value 98 into cell 4, we load a 4 into the MAR and a 98 into the MDR and perform a store. When the operation is completed the contents of cell 4 will have been set to 98, by discarding whatever was there previously.

The MDR is a two-way register. When data is fetched from memory and placed into the MDR, it is written to in one direction. When there is a write instruction, the data to be written is placed into the MDR from another CPU register, which then puts the data into memory.

The Memory Data Register is half of a minimal interface between a micro program and computer storage, the other half is a memory address register.

Index Register

A hardware element which holds a number that can be added to (or, in some cases, subtracted from) the address portion of a computer instruction to form an effective address. Also known as base register. An index register in a computer's CPU is a processor register used for modifying operand addresses during the run of a program.

Memory Buffer Register

MBR stand for Memory Buffer Register. This register holds the contents of data or instruction read from, or written in memory. It means that this register is used to store data/instruction coming from the memory or going to the memory.

Data Register

A register used in microcomputers to temporarily store data being transmitted to or from a peripheral device.

What is ROM What is Memory Unit


Buy This Ad Space @$20 per Month, Ad Size 600X200 Contact on: or 9999595223

Pure VPN Privide Lowest Price VPN Just @ $1.65. Per Month with Non Detected IP Lowest Price Non Detected IP VPN

Magenet is best Adsense Alternative here we earn $2 for single link, Here we get links ads. Magenet

For Projects 9999595223

Google Advertisements

Buy Websites 9999595223

Buy College Projects with Documentation Contact on whatsapp 9999595223. Contact on: or 9999595223 Try this Keyword C++ Programs